The Gold XL tipping trailers are the ideal solution to transport and load harvests, manure, bulk, etc.
In oder to ensure an optimal quality, this range is designed and manufactured with new tools and industrial processes aiming at standardization:
• CAD/CAM design,
• laser cutting,
• assembly on jigs.
It offers a large choice of functional, sturdy and reliable monocoque tipping trailers that will meet the most various and demanding needs.
inner width 2.30 m, side height 1.15 m + extensions, 5 mm floor thickness, side walls in 3.5 mm ST420 special high tensile steel sheets, hydraulic or air braking system, reinforced hydraulic door.
Reinforced tubular chassis in high tensile steel, side walls and monoblock upper circle in ST 420 steel, Omega reinforcement under the posts, two-component polyurethane paint after shot-blasting and phosphating, 5 mm thick floor and 3.5 mm thick side walls.
A large distance between the hinge axes and a hydraulic ram located at the front, combined with the options double-axle and weight transfer in order to avoid chocks while tipping, ensure an irreproachable tipping stability.
These tipping trailers are multi-functional given their large grain chute of 600 mm wide and are suited to all situations (small farm, hills, low barn, etc.). A hydraulic door with wide opening also ensures a great ease of use. Finally, for a better tightness, the high and low eccentrics can be adjusted.
A great attention was devoted to finishings: continuous welding on the side walls, grouping of the hydraulic couplings with guide and colour marks, monoblock rear crosspiece protecting the electric cables, rubber block in order to avoid vibrations and rounded body angles.
With maximal opening of the door, the new design of the arms (manufactured in one part) ensures a total protection of the hydraulic rams and hoses. The tightness of the door is adjusted by means of eccentrics.
This option is very practical for a use by different drivers because it allows to avoid damages when one forgets to open the door. It is recommended on models up to 14 T.
To leave the full tipping trailer parked at the field edge. Significantly improves the stability when loaded.
This 2nd grain chute allows to choose the unloading side: left or right. It is then easier to empty the whole body, even on the sides of the tipping trailer.
From models 15 T, the dual or air braking system provides further safety of use.
This chute allows to improve the unloading precision (e.g. in a manure spreader).
This hitch provides a higher driving comfort.
This option allows to open only one door at a time, in order to check the unloading process more easily.
The cover allows to keep the load in the trailer or to protect it from losses or bad weather conditions. It complies with the new standards in force.
Two types of C high-lift systems allow to lift the back of the body in order to unload cereals or manure, for instance, in a high container. The safety is higher and the precision is maximal thanks to the two stainless steel hatches.
Steel or alu extensions from 20 to 70 cm, for beets or grains, are available to adapt the volume in the best possible way to the type of use, while complying with the authorized weight limits.
Weight transfer for a higher safety when tipping non-fluid materials.