X
Leboulch group News Historical summary Jobs Discover the Leboulch manufacturing processDiscover the Leboulch manufacturing process
X
Range Agricultural tipping trailers Muck spreaders Livestock trailers Hauswirth bale trailers Hauswirth low loaders Pasture care implements Various
GOLD XL monocoque tipping trailers Gold XXL

GOLD XXL monocoque tipping trailers

The GOLD XXL tipping trailer is a vehicle specialized in the transport of large volumes and dense materials thanks to its 150 cm monoblock side walls. These provide the trailer with a high resistance, even in case of intensive use.

It perfectly meets the highest requirements and constraints of farms and large organizations such as agricultural contracting enterprises.

Standard description: Inner width 2.30 m, side height 1.50 m, sprung drawbar, hydraulic stand, tipping by 1000 rpm compressor, hydraulic or air braking system.

Strengths

Volume
Volume

The body has a large capacity as well as a 600 mm wide grain chute and 1.50 m high monoblock side walls, with or without 20 cm extensions. 50 or 70 cm steel or aluminium silage extensions are available as an option. Covers are available for tipping trailers fitted with 20 cm extensions.

Adapted driving
Adapted driving

There are different possibilities of axles: bogie, tandem and tridem, front and rear free steering or self steering axles. The running gear is moreover fitted with a weight transfer system with adjustments for a perfect adaptation to difficult conditions. A wide range of certified tyres is also available.

Manufacturing quality
Manufacturing quality

The manufacturing quality is irreproachable with a reinforced tubular chassis in high tensile steel, side walls and a monoblock upper circle, the use of ST 420 steel, Omega reinforcement under the posts, polyurethane paint after shot-blasting and phosphating.

Finishing
Finishing

A great attention was devoted to finishings: continuous welding on the side walls, grouping of the hydraulic couplings with guide and colour marks, monoblock rear crosspiece protecting the electric cables, rubber block in order to avoid vibrations and rounded body angles.

Option: Automatic opening of the hydraulic door
Option: Automatic opening of the hydraulic door

With maximal opening of the door, the new design of the arms (manufactured in one part) ensures a total protection of the hydraulic rams and hoses. The tightness of the door is adjusted by means of eccentrics.

Option: Mechanical door instead of hydraulic door
Option: Mechanical door instead of hydraulic door

This option is very practical for a use by different drivers because it allows to avoid damages when one forgets to open the door. It is recommended on models up to 14 T.

Option: 2nd hydraulic stand
Option: 2nd hydraulic stand

To leave the full tipping trailer parked at the field edge. Significantly improves the stability when loaded.

Option: 2nd grain hatch (both 400 mm)
Option: 2nd grain hatch (both 400 mm)

Allows to choose the unloading side (left or right-hand).
Allows an easier emptying of the whole body: there is no matter left on the walls.

Option: Air or dual brakes
Option: Air or dual brakes

From models 15 T, the dual or air braking system provides further safety of use.

Option: Removable stainless steel fertilizer chute
Option: Removable stainless steel fertilizer chute

This chute allows to improve the unloading precision (e.g. in a manure spreader).

Option: Scharmüller Ø 80 mm hitch
Option: Scharmüller Ø 80 mm hitch

This hitch provides a higher driving comfort.

Option: Double door for beets with one or two 400 mm grain hatch(es)
Option: Double door for beets with one or two 400 mm grain hatch(es)

This option allows to open only one door at a time, in order to check the unloading process more easily.

Option: Side rolling cover, from the ground, or simple cover
Option: Side rolling cover, from the ground, or simple cover

The cover allows to keep the load in the trailer or to protect it from losses or bad weather conditions. It complies with the new standards in force.

Option: High-lift system
Option: High-lift system

Two types of C high-lift systems allow to lift the back of the body in order to unload cereals or manure, for instance, in a high container. The safety is higher and the precision is maximal thanks to the two stainless steel hatches.

Option: Possibility to add extensions
Option: Possibility to add extensions

Steel or alu extensions from 20 to 70 cm, for beets or grains, are available to adapt the volume in the best possible way to the type of use, while complying with the authorized weight limits.

Option: Weight transfer
Option: Weight transfer

Weight transfer for a higher safety when tipping non-fluid materials.

Pictures

gold-xxl
gold-xxl
gold-xxl
gold-xxl

Videos

gold-xxl

Brochures