Fitted with a wide body that is extremely resistant to the more intensive working conditions, the EVOLUPRO spreader combines sturdiness, efficiency and simplicity.
Designed for high volumes, it is meant for the most demanding professional users.
Finally, it is fitted with a 2-speed gearbox and can be transformed in a silage trailer with door and specific silage extensions.
Standard description: monocoque body bolted on the chassis, beaters on spreading discs (1,100 mm diameter) with moving floor with 4 shipping chains.
1Ø 1,100 mm reinforced beaters
2Mechanically welded steel gearwheels
3Moving floor with bolted tubular slats
4Wear rings on removable blades
5Full protection of the bearings of the beaters
The Evolupro is fitted with vertical beaters with Ø 1,100 mm intersecting regular spirals, a widened body for the matter to glide more easily, a drive through tractor hydraulics or hydraulic installation, a proportional electric control and shipping (14 or 16 mm depending on the model) or Vaucanson chains. Several options are available: reverse, single or electronic DPA (ton/ha system, weighing,...).
The spreading device is made up of Ø 640 and 720 mm horizontal beaters with bolted digging blades, as well as of two Ø 1,100 mm discs with 4 removable blades on monoblock crosspieces, whereby the working width can reach up to 24 m.
The Compostar equipment includes 2 horizontal beaters with bolted digging blades, 2 side boards to compost in a stationary way or at the field edge, an adjustable canopy that can be hydraulically lifted through a double-acting function of the tractor and 2 discs on a Ø 900 mm spreading table with reinforced beam.
There are many protection devices on the EVOLUPRO: reinforced front grate with side boards, anti-projection front cover, galvanized rear boards, front hood protecting the boxes and hydraulic elements, removable mudguards, protected hydraulic door rams, protected lighting that can be hydraulically folded and fully integrated hoses.
Through its LB 4000 control box, Leboulch allows to electronically manage the spreading process.
According to the loaded volume, the working width, the flow/ha, the product density and the door position, the moving floor speed is automatically adjusted to meet the required flow.
The guillotine door is tight and adjustable with an electric safety device and mechanical door opening indicator. It avoids load losses during transport and makes it possible to regulate the flow while spreading.
Steel extension from 200 to 700 mm, depending on the model, to increase the manure or silage volume.
These boards allow to spread at the field edge thanks to a set left or right-hand position.
Protection grate for an optimal safety.
Reliable and very hard-wearing.
A door opening indicator is installed on the front wall of the spreader for the driver to see its opening degree at any moment.